I am using a nanopi R6S. I have installed the Debian bullseye desktop image provided by the manufacturer (FriendlyElec). It is running xfce. When I first started the system up, I tested the sound, and it worked in the USB headset, but not in the HDMI monitor.
Subsequently the sound stopped working - possibly following a "sudo apt-get update"?. The speaker icon at top right has an X next to it. When I click on the icon, it says "Audio mixer...", and when I click on that, it displays an error message ("Connection to PulseAudio failed...").
I am attempting to troubleshoot this, I would be grateful for any assistance.
Edit: Output of inxi -Fxxxz:
Edit2: I ran sudo adduser myusername audio and rebooted, no joy.
Subsequently the sound stopped working - possibly following a "sudo apt-get update"?. The speaker icon at top right has an X next to it. When I click on the icon, it says "Audio mixer...", and when I click on that, it displays an error message ("Connection to PulseAudio failed...").
I am attempting to troubleshoot this, I would be grateful for any assistance.
Edit: Output of inxi -Fxxxz:
Code:
erik@NanoPi-R6C:~$ inxi -FxxxzSystem: Kernel: 6.1.57 aarch64 bits: 64 compiler: gcc v: 10.2.1 Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: Debian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: FriendlyElec NanoPi R6C details: N/A serial: <filter> CPU: Info: 8-Core model: N/A variant-1: cortex-a76 variant-2: cortex-a55 bits: 64 type: MCP arch: ARMv8 rev: 0 features: Use -f option to see features bogomips: 0 Speed: 408 MHz min/max: 408/1800:2352 MHz Core speeds (MHz): 1: 408 2: 408 3: 408 4: 408 5: 408 6: 408 7: 408 8: 408 Graphics: Device-1: display-subsystem driver: rockchip_drm v: N/A bus ID: N/A chip ID: rockchip:display-subsystem class ID: display-subsystem Device-2: mali-bifrost driver: mali v: N/A bus ID: N/A chip ID: arm:fb000000 class ID: gpu Device-3: rk3588-dw-hdmi driver: dwhdmi_rockchip v: N/A bus ID: N/A chip ID: rockchip:fde80000 class ID: hdmi Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting resolution: 1920x1080~60Hz s-dpi: 96 OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.3.5 compat-v: 3.1 direct render: Yes Audio: Device-1: rk3588-dw-hdmi driver: dwhdmi_rockchip bus ID: N/A chip ID: rockchip:fde80000 class ID: hdmi Device-2: hdmi driver: rk_hdmi_sound bus ID: N/A chip ID: rockchip:hdmi0-sound class ID: hdmi0-sound Sound Server: ALSA v: k6.1.57 Network: Device-1: Realtek RTL8125 2.5GbE driver: r8125 v: 9.010.01-NAPI port: 100000 bus ID: 0003:31:00.0 chip ID: 10ec:8125 class ID: 0200 IF: eth1 state: up speed: 1000 Mbps duplex: full mac: <filter> Device-2: rk3588-gmac driver: rk_gmac_dwmac v: N/A port: N/A bus ID: N/A chip ID: rockchip:fe1c0000 class ID: ethernet IF-ID-1: eth0 state: down mac: <filter> Drives: Local Storage: total: 494.67 GiB used: 1.01 GiB (0.2%) ID-1: /dev/mmcblk2 model: A3A551 size: 28.91 GiB rotation: SSD serial: <filter> rev: 0x8 scheme: GPT ID-2: /dev/nvme0n1 vendor: Crucial model: CT500P3PSSD8 size: 465.76 GiB speed: 63.2 Gb/s lanes: 4 rotation: SSD serial: <filter> rev: P9CR411 scheme: MBR Partition: ID-1: / size: 24.51 GiB used: 1.01 GiB (4.1%) fs: overlay source: ERR-102 Swap: Alert: No Swap data was found. Sensors: Missing: Required tool sensors not installed. Check --recommends Info: Processes: 271 Uptime: 10m Memory: 7.74 GiB used: 1.3 GiB (16.9%) Init: systemd v: 247 runlevel: 5 Compilers: gcc: 10.2.1 alt: 10 Packages: apt: 1517 Shell: Bash v: 5.1.4 running in: x-terminal-emul inxi: 3.3.01Statistics: Posted by erik — 2024-05-26 14:31 — Replies 7 — Views 163