General Questions • [Hardware] Black screen after resume from sleep (bookworm)

Code:

cat /sys/power/mem_sleeps2idle [deep]

Code:

Jul 15 21:14:07 cyclops kernel: x86: Booting SMP configuration:Jul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2Jul 15 21:14:07 cyclops kernel: CPU1 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 2 APIC 0x4Jul 15 21:14:07 cyclops kernel: CPU2 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 3 APIC 0x6Jul 15 21:14:07 cyclops kernel: CPU3 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 4 APIC 0x1Jul 15 21:14:07 cyclops kernel: CPU4 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 5 APIC 0x3Jul 15 21:14:07 cyclops kernel: CPU5 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 6 APIC 0x5Jul 15 21:14:07 cyclops kernel: CPU6 is upJul 15 21:14:07 cyclops kernel: smpboot: Booting Node 0 Processor 7 APIC 0x7Jul 15 21:14:07 cyclops kernel: CPU7 is upJul 15 21:14:07 cyclops kernel: ACPI: PM: Waking up from system sleep state S3Jul 15 21:14:07 cyclops kernel: DMAR: DRHD: handling fault status reg 2Jul 15 21:14:07 cyclops kernel: DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt requestJul 15 21:14:07 cyclops kernel: xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, ReinitJul 15 21:14:07 cyclops kernel: usb usb1: root hub lost power or was resetJul 15 21:14:07 cyclops kernel: usb usb2: root hub lost power or was resetJul 15 21:14:07 cyclops kernel: xhci_hcd 0000:08:00.0: xHC error in resume, USBSTS 0x401, ReinitJul 15 21:14:07 cyclops kernel: usb usb3: root hub lost power or was resetJul 15 21:14:07 cyclops kernel: usb usb4: root hub lost power or was resetJul 15 21:14:07 cyclops kernel: serial 00:03: activatedJul 15 21:14:07 cyclops kernel: ata6: SATA link down (SStatus 4 SControl 300)Jul 15 21:14:07 cyclops kernel: ata5: SATA link down (SStatus 4 SControl 300)Jul 15 21:14:07 cyclops kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)Jul 15 21:14:07 cyclops kernel: ata2.00: Entering active power modeJul 15 21:14:07 cyclops kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)Jul 15 21:14:07 cyclops kernel: ata1.00: Entering active power modeJul 15 21:14:07 cyclops kernel: ata1.00: supports DRM functions and may not be fully accessibleJul 15 21:14:07 cyclops kernel: ata2.00: supports DRM functions and may not be fully accessibleJul 15 21:14:07 cyclops kernel: ata2.00: supports DRM functions and may not be fully accessibleJul 15 21:14:07 cyclops kernel: ata1.00: supports DRM functions and may not be fully accessibleJul 15 21:14:07 cyclops kernel: ata2.00: configured for UDMA/133Jul 15 21:14:07 cyclops kernel: ata1.00: configured for UDMA/133Jul 15 21:14:07 cyclops kernel: ata1.00: Enabling discard_zeroes_dataJul 15 21:14:07 cyclops kernel: usb 1-7: reset full-speed USB device number 2 using xhci_hcdJul 15 21:14:07 cyclops kernel: pci_bus 0000:05: Allocating resourcesJul 15 21:14:07 cyclops kernel: pcieport 0000:05:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:01.0: BAR 14: no space for [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:01.0: BAR 14: failed to assign [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:04.0: BAR 14: no space for [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:04.0: BAR 14: failed to assign [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:04.0: BAR 14: no space for [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:04.0: BAR 14: failed to assign [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:01.0: BAR 14: no space for [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: pcieport 0000:05:01.0: BAR 14: failed to assign [mem size 0x00200000]Jul 15 21:14:07 cyclops kernel: OOM killer enabled.Jul 15 21:14:07 cyclops kernel: Restarting tasks ... done.Jul 15 21:14:07 cyclops kernel: random: crng reseeded on system resumptionJul 15 21:14:07 cyclops kernel: PM: suspend exitJul 15 21:14:07 cyclops systemd-sleep[60150]: System returned from sleep state.Jul 15 21:14:08 cyclops systemd[1]: Started anacron.service - Run anacron jobs.Jul 15 21:14:08 cyclops anacron[60208]: Anacron 2.3 started on 2024-07-15Jul 15 21:14:08 cyclops systemd[1]: Starting apt-daily.service - Daily apt download activities...Jul 15 21:14:08 cyclops anacron[60208]: Normal exit (0 jobs run)Jul 15 21:14:08 cyclops systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...Jul 15 21:14:08 cyclops systemd[1]: anacron.service: Deactivated successfully.Jul 15 21:14:08 cyclops systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status.Jul 15 21:14:08 cyclops kernel: usb 1-14: new high-speed USB device number 11 using xhci_hcdJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017Jul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Device revision is 1Jul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Secure boot is enabledJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: OTP lock is enabledJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: API lock is enabledJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Debug lock is disabledJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014Jul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfiJul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Boot Address: 0x24800Jul 15 21:14:08 cyclops kernel: Bluetooth: hci0: Firmware Version: 15-45.22Jul 15 21:14:08 cyclops kernel: usb 1-14: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.01Jul 15 21:14:08 cyclops kernel: usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0Jul 15 21:14:08 cyclops kernel: usb 1-14: Product: USB2.1 HubJul 15 21:14:08 cyclops kernel: usb 1-14: Manufacturer: GenericJul 15 21:14:08 cyclops kernel: hub 1-14:1.0: USB hub foundJul 15 21:14:08 cyclops kernel: hub 1-14:1.0: 5 ports detectedJul 15 21:14:08 cyclops systemd[1687]: Stopped target bluetooth.target - Bluetooth.Jul 15 21:14:08 cyclops systemd[1]: Stopped target bluetooth.target - Bluetooth Support.Jul 15 21:14:08 cyclops systemd[1]: Reached target bluetooth.target - Bluetooth Support.Jul 15 21:14:08 cyclops systemd[1687]: Reached target bluetooth.target - Bluetooth.ul 15 21:14:08 cyclops kernel: usb 1-14.1: new full-speed USB device number 12 using xhci_hcdJul 15 21:14:08 cyclops kernel: usb 1-14.1: New USB device found, idVendor=046d, idProduct=c08b, bcdDevice=27.03Jul 15 21:14:08 cyclops kernel: usb 1-14.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3Jul 15 21:14:08 cyclops kernel: usb 1-14.1: Product: G502 HERO SEJul 15 21:14:08 cyclops kernel: usb 1-14.1: Manufacturer: LogitechJul 15 21:14:08 cyclops kernel: usb 1-14.1: SerialNumber: 0581314F3930Jul 15 21:14:08 cyclops kernel: input: Logitech G502 HERO SE as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.0/0003:046D:C08B.0009/input/input63Jul 15 21:14:08 cyclops kernel: hid-generic 0003:046D:C08B.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech G502 HERO SE] on usb-0000:00:14.0-14.1/input0Jul 15 21:14:08 cyclops kernel: input: Logitech G502 HERO SE Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1/1-14.1:1.1/0003:046D:C08B.000A/input/input64Jul 15 21:14:08 cyclops kernel: hid-generic 0003:046D:C08B.000A: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G502 HERO SE] on usb-0000:00:14.0-14.1/input1Jul 15 21:14:08 cyclops kernel: usb 1-14.2: new low-speed USB device number 13 using xhci_hcdJul 15 21:14:08 cyclops kernel: usb 1-14.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00Jul 15 21:14:08 cyclops kernel: usb 1-14.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0Jul 15 21:14:08 cyclops kernel: usb 1-14.2: Product: USB KeyboardJul 15 21:14:08 cyclops kernel: usb 1-14.2: Manufacturer: LogitechJul 15 21:14:08 cyclops kernel: input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.0/0003:046D:C31C.000B/input/input67Jul 15 21:14:08 cyclops kernel: hid-generic 0003:046D:C31C.000B: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-14.2/input0Jul 15 21:14:08 cyclops kernel: input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.1/0003:046D:C31C.000C/input/input68Jul 15 21:14:09 cyclops kernel: input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2/1-14.2:1.1/0003:046D:C31C.000C/input/input69Jul 15 21:14:09 cyclops kernel: hid-generic 0003:046D:C31C.000C: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-14.2/input1Jul 15 21:14:09 cyclops kernel: usb 1-14.3: new high-speed USB device number 14 using xhci_hcdJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Waiting for firmware download to completeJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Firmware loaded in 1623066 usecsJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Waiting for device to bootJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Device booted in 13672 usecsJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddcJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Applying Intel DDC parameters completedJul 15 21:14:09 cyclops kernel: Bluetooth: hci0: Firmware revision 0.3 build 15 week 45 2022Jul 15 21:14:09 cyclops bluetoothd[704]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.Jul 15 21:14:09 cyclops bluetoothd[704]: sap-server: Operation not permitted (1)Jul 15 21:14:09 cyclops kernel: Bluetooth: MGMT ver 1.22Jul 15 21:14:11 cyclops kernel: usb 1-14.3: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11Jul 15 21:14:11 cyclops kernel: usb 1-14.3: New USB device strings: Mfr=0, Product=2, SerialNumber=1Jul 15 21:14:11 cyclops kernel: usb 1-14.3: Product: HD Pro Webcam C920Jul 15 21:14:11 cyclops kernel: usb 1-14.3: SerialNumber: 9F8FF4AFJul 15 21:14:11 cyclops kernel: usb 1-14.3: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)Jul 15 21:14:11 cyclops kernel: input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.3/1-14.3:1.0/input/input70Jul 15 21:14:11 cyclops mtp-probe[60243]: checking bus 1, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1"Jul 15 21:14:11 cyclops mtp-probe[60242]: checking bus 1, device 13: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2"Jul 15 21:14:11 cyclops mtp-probe[60244]: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.3"Jul 15 21:14:11 cyclops mtp-probe[60243]: bus: 1, device: 12 was not an MTP deviceJul 15 21:14:11 cyclops mtp-probe[60242]: bus: 1, device: 13 was not an MTP deviceJul 15 21:14:11 cyclops mtp-probe[60244]: bus: 1, device: 14 was not an MTP deviceJul 15 21:14:11 cyclops wireplumber[1710]: <WpPortalPermissionStorePlugin:0x55c6d4b03e30> Failed to call Lookup: GDBus.Error:org.freedesktop.portal.Error.NotFound: No entry for cameraJul 15 21:14:12 cyclops systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.Jul 15 21:14:12 cyclops kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)Jul 15 21:14:12 cyclops kernel: ata3.00: Entering active power modeJul 15 21:14:12 cyclops kernel: ata3.00: configured for UDMA/133Jul 15 21:14:12 cyclops kernel: ata4: link is slow to respond, please be patient (ready=0)Jul 15 21:14:13 cyclops systemd[1]: systemd-rfkill.service: Deactivated successfully.Jul 15 21:14:14 cyclops systemd-logind[728]: Watching system buttons on /dev/input/event20 (Logitech USB Keyboard System Control)Jul 15 21:14:14 cyclops systemd-logind[728]: Watching system buttons on /dev/input/event18 (Logitech USB Keyboard)Jul 15 21:14:14 cyclops mtp-probe[60267]: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.3"Jul 15 21:14:14 cyclops mtp-probe[60267]: bus: 1, device: 14 was not an MTP deviceJul 15 21:14:14 cyclops systemd-logind[728]: Watching system buttons on /dev/input/event17 (Logitech G502 HERO SE Keyboard)Jul 15 21:14:14 cyclops mtp-probe[60271]: checking bus 1, device 12: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.1"Jul 15 21:14:14 cyclops mtp-probe[60271]: bus: 1, device: 12 was not an MTP deviceJul 15 21:14:14 cyclops mtp-probe[60272]: checking bus 1, device 13: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.2"Jul 15 21:14:14 cyclops mtp-probe[60272]: bus: 1, device: 13 was not an MTP device