I have an elitedesk 800 G3 TWR. It has 4 dimm slots, and can handle a maximum of 64 gb ram.
I have 2x PSD416GB2133K (Patriot 16 Gb DDR4 2133 MHz), but each only shows up as 8 Gb.
I have 2x PSD416GB2133K (Patriot 16 Gb DDR4 2133 MHz), but each only shows up as 8 Gb.
Code:
*-bank:0 description: DIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns) product: PSD48G21332 vendor: Unknown - [0x0285] physical id: 0 serial: 00000000 slot: DIMM1 size: 8GiB width: 64 bits clock: 2133MHz (0.5ns) *-bank:1 .. *-bank:2 description: DIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns) product: PSD48G21332 vendor: Unknown - [0x0285] physical id: 2 serial: 00000000 slot: DIMM3 size: 8GiB width: 64 bits clock: 2133MHz (0.5ns)[/pre][b]I can't figure out why.[/b] What can I do?I've previously used these sticks in another computer where they showed up as 2x 16 Gb.If I add a third 16 Gb stick (HMA82GU6AFR8N-UH; 16 gb DDR4 2400 MHz), this new stick correctly shows up as 16 gb. The others are stuck at 8 gb each. [pre] *-memory description: System Memory physical id: 0 slot: System board or motherboard size: 32GiB *-bank:0 description: DIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns) product: PSD48G21332 vendor: Unknown - [0x0285] physical id: 0 serial: 00000000 slot: DIMM1 size: 8GiB width: 64 bits clock: 2133MHz (0.5ns) *-bank:1 description: DIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns) product: HMA82GU6AFR8N-UH vendor: Hynix/Hyundai physical id: 1 serial: 71CFC0AE slot: DIMM2 size: 16GiB width: 64 bits clock: 2133MHz (0.5ns) *-bank:2 description: DIMM DDR4 Synchronous Unbuffered (Unregistered) 2133 MHz (0.5 ns) product: PSD48G21332 vendor: Unknown - [0x0285] physical id: 2 serial: 00000000 slot: DIMM3 size: 8GiB width: 64 bits clock: 2133MHz (0.5ns)Statistics: Posted by verahill — 2024-09-30 12:35 — Replies 3 — Views 111