Greetings,
I'm new to the Linux environment so am a tad green but I've got a pretty good grasp on computer hardware having almost 25 years experience building and diagnosing computer systems with Windows.
I'm running a dual monitor setup on an ASUS TUF F17 Gaming laptop with dual boot between Win 11 and Debian 12.8 with Cinnamon.
Specs:
Intel 13700H with Iris Xe Graphics
NVIDIA RTX4060 Laptop GPU
500GB SSD with 306GB for Windows and the remaining to Debian
16GB Ram
2 Generic 1080p TV's with HDMI inputs
My issue is that with the laptop closed, I can only get the one screen (Plugged into the USB=C Display Port using a USB-C to HDMI adapter) to function. When I check the display settings the upper left hand corner of the screen shows the wrong TV being active which is overlaying the laptop screen. When I open the laptop up, the laptop screen starts up showing as the primary display and the TV plugged into the USB-C port shows as the TV I have plugged into the laptop's HDMI port with nothing displaying on that actual TV. I've tried adjusting the laptop's built in screen refresh rate to 60.1Hz which matches both TVs with no luck.
I've done several searches to no avail.
Feel free to ask me for more details and I'll provide them as best I can.
I'm new to the Linux environment so am a tad green but I've got a pretty good grasp on computer hardware having almost 25 years experience building and diagnosing computer systems with Windows.
I'm running a dual monitor setup on an ASUS TUF F17 Gaming laptop with dual boot between Win 11 and Debian 12.8 with Cinnamon.
Specs:
Intel 13700H with Iris Xe Graphics
NVIDIA RTX4060 Laptop GPU
500GB SSD with 306GB for Windows and the remaining to Debian
16GB Ram
2 Generic 1080p TV's with HDMI inputs
My issue is that with the laptop closed, I can only get the one screen (Plugged into the USB=C Display Port using a USB-C to HDMI adapter) to function. When I check the display settings the upper left hand corner of the screen shows the wrong TV being active which is overlaying the laptop screen. When I open the laptop up, the laptop screen starts up showing as the primary display and the TV plugged into the USB-C port shows as the TV I have plugged into the laptop's HDMI port with nothing displaying on that actual TV. I've tried adjusting the laptop's built in screen refresh rate to 60.1Hz which matches both TVs with no luck.
I've done several searches to no avail.
Feel free to ask me for more details and I'll provide them as best I can.
Statistics: Posted by viking007 — 2024-11-27 02:55 — Replies 1 — Views 43