uname outputNo dmesg errors related to sound:inxi output:
Code:
Linux RBTEST-D12 6.1.0-18-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01) x86_64 GNU/Linux
Code:
jklug@RBTEST-D12:~$ sudo dmesg --level err,warn[ 0.122911] #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31[ 0.199002] pmd_set_huge: Cannot satisfy [mem 0xc0000000-0xc0200000] with a huge-page mapping due to MTRR override.[ 0.321351] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref][ 0.844991] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control[ 1.718079] systemd[1]: /etc/systemd/system/wazuh-agent.service:11: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.[ 1.769902] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.[ 1.987022] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver[ 1.987213] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)[ 1.987223] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware[ 1.987233] iwlwifi 0000:00:14.3: firmware: failed to load iwl-debug-yoyo.bin (-2)[ 2.127564] thermal thermal_zone1: failed to read out thermal zone (-61)[ 2932.925565] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.[ 2981.647986] nfs4: Deprecated parameter 'intr'[ 3054.365496] nfs4: Deprecated parameter 'intr'[ 3188.478380] kauditd_printk_skb: 18 callbacks suppressed[ 3285.432029] kauditd_printk_skb: 53 callbacks suppressed[ 3579.479388] kauditd_printk_skb: 6 callbacks suppressed[ 3642.773516] kauditd_printk_skb: 102 callbacks suppress
Code:
$ inxi -FazSystem: Kernel: 6.1.0-18-amd64 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0 parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 root=UUID=73cde2d3-203e-480f-8760-072b634a97af ro quiet Desktop: GNOME v: 43.9 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM3 v: 43.0 Distro: Debian GNU/Linux 12 (bookworm)Machine: Type: Desktop System: Micro product: B941 v: 1.0 serial: <superuser required> Mobo: Micro-Star model: PRO Z690-A WIFI (MS-7D25) v: 2.0 serial: <superuser required> UEFI: American Megatrends LLC. v: A.MF date: 09/27/2023CPU: Info: model: Intel Core i9-14900K bits: 64 type: MST AMCP arch: Raptor Lake gen: core 14 level: v3 note: check built: 2022+ process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1 microcode: 0x11D Topology: cpus: 1x cores: 24 mt: 8 tpc: 2 st: 16 threads: 32 smt: enabled cache: L1: 2.1 MiB desc: d-16x32 KiB, 8x48 KiB; i-8x32 KiB, 16x64 KiB L2: 32 MiB desc: 8x2 MiB, 4x4 MiB L3: 36 MiB desc: 1x36 MiB Speed (MHz): avg: 837 high: 1100 min/max: 800/5700:6000:4400 scaling: driver: intel_pstate governor: powersave cores: 1: 1100 2: 800 3: 1100 4: 800 5: 800 6: 800 7: 1100 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800 14: 800 15: 1100 16: 800 17: 800 18: 800 19: 800 20: 800 21: 800 22: 800 23: 800 24: 800 25: 800 26: 800 27: 800 28: 800 29: 800 30: 800 31: 800 32: 800 bogomips: 203980 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Vulnerabilities: Type: gather_data_sampling status: Not affected Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: mmio_stale_data status: Not affected Type: retbleed status: Not affected Type: spec_rstack_overflow status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling, PBRSB-eIBRS: SW sequence Type: srbds status: Not affected Type: tsx_async_abort status: Not affectedGraphics: Device-1: Intel Raptor Lake-S GT1 [UHD Graphics 770] vendor: Micro-Star MSI driver: i915 v: kernel arch: Gen-13 process: Intel 7 (10nm) built: 2022+ ports: active: DP-1,HDMI-A-1 empty: DP-2, HDMI-A-2, HDMI-A-3, HDMI-A-4 bus-ID: 00:02.0 chip-ID: 8086:a780 class-ID: 0300 Display: wayland server: X.org v: 1.21.1.7 with: Xwayland v: 22.1.9 compositor: gnome-shell driver: gpu: i915 display-ID: 0 Monitor-1: DP-1 model: Dell P2219H serial: <filter> built: 2019 res: 1920x1080 dpi: 102 gamma: 1.2 size: 476x267mm (18.74x10.51") diag: 546mm (21.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 Monitor-2: HDMI-A-1 model: Dell P2219H serial: <filter> built: 2019 res: 1920x1080 dpi: 102 gamma: 1.2 size: 476x267mm (18.74x10.51") diag: 546mm (21.5") ratio: 16:9 modes: max: 1920x1080 min: 720x400 API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel Graphics (RPL-S) direct-render: YesAudio: Device-1: Intel Alder Lake-S HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:7ad0 class-ID: 0403 API: ALSA v: k6.1.0-18-amd64 status: kernel-api tools: alsamixer,amixer Server-1: PipeWire v: 0.3.65 status: active with: 1: pipewire-pulse status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctlNetwork: Device-1: Intel Alder Lake-S PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:7af0 class-ID: 0280 IF: wlo1 state: down mac: <filter> Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: TP-LINK TG-3468 driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200 IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter> Device-3: Intel Ethernet I225-V vendor: Micro-Star MSI driver: igc v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 03:00.0 chip-ID: 8086:15f3 class-ID: 0200 IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>Bluetooth: Device-1: Intel AX211 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 1-14:8 chip-ID: 8087:0033 class-ID: e001 Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> Info: acl-mtu: 1021:4 sco-mtu: 96:6 link-policy: rswitch sniff link-mode: peripheral accept service-classes: rendering, capturing, audio, telephonyDrives: Local Storage: total: 1.82 TiB used: 9.51 GiB (0.5%) SMART Message: Required tool smartctl not installed. Check --recommends ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WD Blue SN580 2TB size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter> rev: 281010WD temp: 39.9 C scheme: GPT ID-2: /dev/sda maj-min: 8:0 type: USB model: USB Flash Disk size: 3.75 GiB block-size: physical: 512 B logical: 512 B type: SSD serial: <filter> rev: 1100Partition: ID-1: / raw-size: 1.82 TiB size: 1.79 TiB (98.37%) used: 8.08 GiB (0.4%) fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 11.9 MiB (2.3%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1Swap: Kernel: swappiness: 60 (default) cache-pressure: 100 (default) ID-1: swap-1 type: partition size: 977 MiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3Sensors: System Temperatures: cpu: 29.0 C mobo: N/A Fan Speeds (RPM): N/AInfo: Processes: 524 Uptime: 1h 32m wakeups: 0 Memory: 62.58 GiB used: 6.39 GiB (10.2%) Init: systemd v: 252 target: graphical (5) default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12 Packages: 1900 pm: dpkg pkgs: 1894 libs: 1125 tools: apt,apt-get,gnome-software,synaptic pm: flatpak pkgs: 0 pm: snap pkgs: 6 Shell: Bash v: 5.2.15 running-in: terminator inxi: 3.3.26
Statistics: Posted by klugja — 2024-03-11 21:09 — Replies 1 — Views 62